Power on the AP and let it boot completely. Log in with the standard credentials (default is Cisco/Cisco ) and type the following command to begin image deployment:

: To convert a CAPWAP access point successfully, it must run a software version that supports conversion. If the AP runs an OS older than 8.3, upgrade its lightweight image using standard CAPWAP firmware before attempting the ME migration. 💾 Downloading the Software Image

Give your PC a static IP address in the same subnet as the AP (e.g., 192.168.1.5 ). Step 2: Establish a Console Connection

Open a terminal application like PuTTY with settings: Speed: 9600 , Data bits: 8 , Stop bits: 1 , Parity: None . Step 3: Run the Conversion Command

Before attempting the conversion from CAPWAP to Mobility Express (ME), verify that your hardware and environment match these specific requirements:

Place the downloaded file into the TFTP server's root directory.

: Compare the MD5 checksum of your downloaded file against the hash provided on the Cisco site to ensure the download is not corrupted. 🖥️ How to Install the Firmware via CLI

Install a software tool like on your administrative PC.

To get the firmware working correctly on your device, follow these steps to secure the exact image file:

: Navigate to the official Cisco Support and Downloads Page.