Toddler Bed: Remove one side rail and install the Bonavita Toddler Guard Rail (sold separately).Daybed: Simply remove the toddler guard rail or the front side rail while keeping the mattress at its lowest setting.Full-Size Bed: The headboard and footboard can be attached to a standard metal bolt-on bed frame using conversion rails. Safety Warnings and Maintenance bonavita hudson ii lifestyle crib instructions

Step 3: Install the Mattress Support FrameThe mattress support is a metal grid that holds the weight of the mattress and your baby. Most Hudson II models offer three height positions.Newborns: Use the highest setting to save your back while lifting the baby.Active Babies: Once your child can sit up, move it to the middle setting.Toddlers: Once your child can stand, use the lowest setting to prevent them from climbing out.Bolt the support frame into the brackets on the corner posts. Ensure the "Warning" labels on the support frame are facing upward.

Step 4: Final Safety CheckGive the crib a firm shake. There should be no wobbling or rattling. Check that there are no gaps wider than two fingers between the mattress and the crib sides. Conversion Options If you have lost your original paper manual,

Bonavita Hudson II Lifestyle Crib Assembly and Safety Guide The Bonavita Hudson II Lifestyle Crib is a popular choice for parents seeking a blend of classic design and long-term versatility. As a "lifestyle" crib, it is designed to grow with your child, transitioning from a crib to a toddler bed, daybed, and eventually a full-size headboard. However, ensuring the safety of your nursery begins with a correct and secure assembly. Preparation and Pre-Assembly

Clear the space. Assemble the crib in the room where it will stay to avoid trying to move a fully built crib through narrow doorways.Protect your floors. Lay down a blanket or the shipping cardboard to prevent scratching the finish of the wood.Inventory check. Open all boxes and lay out the components. You should have a headboard, a footboard, two side rails, a mattress support frame, and a hardware kit containing bolts, wood dowels, and an Allen wrench.Inspect for damage. Check every wooden piece for cracks or splinters. If a part is damaged, do not attempt to "rig" it. Contact the manufacturer for a replacement. Step-by-Step Assembly Instructions Toddler Bed: Remove one side rail and install

Step 2: Connect the FootboardRepeat the process for the footboard. Align the side rails with the footboard posts, insert the hardware, and tighten. Once all four corners are connected, go back and tighten all bolts firmly.