The BX60 uses a needle-based ammeter to show the current flow:
Before starting, inspect your battery. If it has removable caps, carefully remove them and ensure the liquid level is correct. If low, top it up with . Do not use tap water. 2. Monitoring the Ammeter
: Confirm your battery is a 12V lead-acid type . The BX60 is not typically recommended for deep cycle marine batteries or non-rechargeable types. bradex bx60 battery charger instructions best
The BX60 is a 4-Amp charger. To estimate time, divide your battery's Amp-hour (Ah) rating by 4. For example, a 40Ah battery will take approximately 10 hours to charge from flat.
: Periodically wipe the crocodile clips with a dry cloth to remove any corrosion or debris that could interfere with the connection. The BX60 uses a needle-based ammeter to show
: Keep the unit dry. Do not use the charger in rain or damp conditions, as this can damage the internal transformer. Maintenance Tips
: Never place the charger directly on top of the battery. Keep it as far away as the cables allow to prevent corrosion from battery fumes. Do not use tap water
Attach the clip to the positive terminal of the battery. Attach the Black (-) clip to the negative terminal.
: As the battery nears full capacity, the current will naturally drop.