If the meter is "maxed out" at 99%, turn the sensitivity down so you can see movement.
As you hit a satellite, the percentage will jump and the audible tone will get higher.
Connect the coaxial cable coming from your satellite receiver to the port on the RV3 marked "TO REC." deutsche technologies rv3 digital satellite finder manual
Ensure there are no trees, buildings, or power lines obstructing the "line of sight" between your dish and the southern sky. 5. Pro Tips for RV Users
Check the connection to your receiver. The receiver must be turned on and the cable must be "live" to power the meter. If the meter is "maxed out" at 99%,
Always keep a high-quality 3-foot RG6 jumper cable in your RV kit specifically for the RV3.
Once your dish is locked in, disconnect the RV3 and connect the LNB directly to the receiver cable. Leaving the meter inline can cause slight signal loss or "attenuation" during regular viewing. Always keep a high-quality 3-foot RG6 jumper cable
Heavy rain or thick clouds can dampen signal strength. Try to calibrate on a clear day if possible.
You may be locked onto the wrong satellite. Many satellites share similar frequencies. Check your receiver to see if it recognizes the specific satellite provider (e.g., Dish, DirecTV, or Free-to-Air).