Elstat Ems 25 Advanced Manual 'link' May 2026

To modify settings or perform tests, you must enter the "Key Dance" password sequence.

Door open alarm; triggered if the door remains open for an extended period.

Activated during periods of zero predicted traffic. The controller allows the temperature to rise to a "Saving" set point (approx. 50°F), turns off cabinet lights, and cycles the evaporator fan to conserve power. The display may show "---" or "SAb" . Elstat Ems 25 Advanced Manual

High condenser temperature; often caused by a blocked condenser or inadequate ventilation.

100-240VAC (internal power supply converts to 12VDC for the display). To modify settings or perform tests, you must

Appliance or condenser sensor failure. The controller may stop the compressor to prevent damage.

The higher temperature allowed during energy-saving periods. Pull-Down Temp The controller allows the temperature to rise to

If the controller's learning matrix becomes corrupted or needs a fresh start (e.g., after moving the cabinet to a new location), perform a Half Reset: Navigate to the menu using the password steps above. Press Set ; the screen will display "PAS" again.