To perform a on an Evoko Liso room manager , you must use a bootable USB flash drive containing the official firmware reset image . Unlike many consumer devices, the Evoko Liso does not have a simple "factory reset" button; the pinhole on the bottom of the unit is for rebooting only and will not wipe data or configuration settings. 1. Prepare the Reset USB Drive
: Wait for the message: "Flash has been successfully completed!" . evoko liso factory reset verified
Insert a USB drive (at least 4GB; note that Kingston drives are often incompatible with Liso). Select the downloaded .gz image and flash it to the drive. To perform a on an Evoko Liso room
: Obtain the latest Liso Device Reset (GZ file) from the Biamp/Evoko Support Portal . Ensure you select the version (e.g., v. 2.x) that matches your Evoko Home installation. Prepare the Reset USB Drive : Wait for
: Use a tool like balenaEtcher or Win32 Disk Imager .
You cannot simply copy files to a thumb drive; it must be "imaged" to become bootable.
: Disconnect the PoE or power cable from the back of the Liso.