Lenel LNL-3300-M5 Installation & Migration Guide The Lenel LNL-3300-M5 Go to product viewer dialog for this item.
OnGuard software must be licensed and configured for the LNL-3300 series.
Completely power down the legacy controller and disconnect the backup battery. Lenel Lnl-3300-m5 Installation Manual UPD
Unscrew and remove the legacy M5/M3000 CPU (e.g., E, P, PX, PXN, or PXNplus) and the CASI Power/Comm Board (PN: 110064001). Insert LNL-3300-M5
A standard Cat5/6 cable for Ethernet and shielded twisted pair (24 AWG) for RS-485 downstream communication. Lenel LNL-3300-M5 Installation & Migration Guide The Lenel
Legacy CASI M Series boards cannot be mixed with Lenel M Series boards in the same controller; if you convert a controller, all boards within it must be upgraded to the Lenel M Series. 2. Physical Installation Steps To install or migrate to the LNL-3300-M5
The board is designed to retrofit into legacy CASI M5/M3000 enclosures. Unscrew and remove the legacy M5/M3000 CPU (e
Label and unplug the field wiring and the power/comm board connectors from the legacy CPU.
Before beginning, ensure you have the following requirements and tools: 12 VDC ± 10% at approximately 300mA.
