If you’re looking to automate your home lighting, hydroponics system, or security setup, the is one of the most reliable digital timers on the market. However, with its updated programming interface, getting it synced perfectly can be a bit tricky if you’ve lost the original pamphlet.
Press HOUR and MIN to choose when the device should turn on.
The IPSA TE-102 34-20 supports up to 20 different "On/Off" programs. manual temporizador digital ipsa te 102 34 20 updated
Press the PROG button once. You will see "1 ON" on the screen.
If you see a small "R" or "Random" icon, the timer will vary your set times by 10–30 minutes to make the home look occupied. Press WEEK and HOUR simultaneously (on most updated models) to toggle this off. Technical Specifications Model: IPSA TE-102 34-20 Max Load: 15A / 1800W Voltage: 120V AC / 60Hz Programs: 20 On/Off Pairs Battery Backup: Ni-MH Rechargeable If you’re looking to automate your home lighting,
Still holding , press HOUR and MIN to set the current time.
While holding , press WEEK until the correct day appears at the top of the screen (Mo, Tu, We, Th, Fr, Sa, Su). The IPSA TE-102 34-20 supports up to 20
A common mistake is programming the timer but forgetting to put it in the correct mode. There is a button labeled (or sometimes just ON/AUTO/OFF ). ON: Power is always flowing (ignores programs). OFF: Power is always cut (ignores programs). AUTO: The device will follow your programmed schedules.
Note: Ensure you check the AM/PM indicator if you are not using 24-hour mode. 3. Programming Your On/Off Cycles (The "Updated" Steps)
Press WEEK . You can choose individual days, or blocks (e.g., Mon-Fri, Weekends only, or the entire week).