Nitocote+pe135+msds+best 〈Deluxe - 2024〉

Store in original, tightly closed containers in a cool, dry place (below 40°C). Application Best Practices

For the , surfaces must be clean and free of dust, oil, or grease. Porous substrates should be pre-soaked with water for 30 minutes before application.

It serves as both a protective coating and a curing compound , complying with ASTM C309 standards for concrete curing. nitocote+pe135+msds+best

Unlike many traditional coatings, Nitocote PE135 can be applied to damp concrete just 24 hours old.

Clean up minor spills with absorbent material like sand or earth. The product is slippery when wet. Store in original, tightly closed containers in a

The formula is solvent-free, non-toxic, and free from hazardous materials like coal tar pitch or asbestos. Technical Specifications Density (@ 27°C) 1.28 ± 0.03 g/cc Solids Content (Volume) ASTM D2697 Adhesion Strength >1.0 N/mm² ASTM D4541 Water Absorption BS 1881 Pt. 122 Water Permeability DIN 1048 Pt. 5 Surface Dry Time 10–15 min (@ 35°C) ASTM D1640 Nitocote PE135 MSDS & Safety Guidelines

If contact occurs, wash with soap and water immediately. Avoid using solvents for skin cleaning. It serves as both a protective coating and

Wear safety goggles and chemical-resistant gloves (neoprene is recommended) during application.

According to the , Nitocote PE135 is a non-hazardous, water-based liquid. However, standard safety practices are essential: