Sony G3312 Lock Remove Ftf File Direct

Flashtool will begin the flashing process. Do not disconnect the cable or power off your PC. Once the log shows "Flashing finished," unplug your device and power it on. The first boot may take up to 10 minutes as the system initializes. 💡 Troubleshooting FRP (Google Account Lock)

If the device asks for a Google account after flashing, the Factory Reset Protection (FRP) is still active. To bypass this on the G3312:

The community-developed Flashtool is generally preferred for removing locks. Sony G3312 Lock Remove Ftf File

You must download the firmware specifically for the G3312 variant. Using firmware for the G3311 or other models can result in a hard brick.

In the "Wipe" pane of Flashtool, ensure that , CACHE , and APPS_LOG are checked. This is the step that actually removes the lock screen and factory resets the device during the flash. 4. Initiate Flashmode Flashtool will begin the flashing process

The LED on the phone should turn green, indicating it is in Flashmode. 5. Complete the Process

Click "Flash." The software will take a moment to prepare the files, then a pop-up will instruct you to connect your phone. Power off your Sony G3312 completely. Hold the button. While holding the button, connect the USB cable to your PC. The first boot may take up to 10

Open Xperifirm and locate the Xperia L1 (G3312). Download the appropriate firmware for your region. Once downloaded, the tool will unpack the files and create the single FTF file needed for the process. Move this file to the C:/Users/YourName/.flashTool/firmwares folder. 2. Configure Flashtool