Swiss Kraft: Sk1800 Generator Manual

Before starting your Swiss Kraft SK1800 for the first time, follow these critical preparation steps:

Turn the main engine switch to the "ON" position.

Since this is a 2-stroke engine, you must mix gasoline with 2-stroke engine oil. Do not use pure gasoline , as it will seize the engine. Check the fuel cap for the specific mixing ratio (typically 50:1 or 40:1). swiss kraft sk1800 generator manual

Once started, gradually move the choke lever back to the "RUN" or "OPEN" position. Let the engine stabilize for 1–2 minutes before plugging in devices. agro.erinok.com

Pull the starter cord slowly until you feel resistance, then pull sharply to start the engine. Before starting your Swiss Kraft SK1800 for the

Properly managing the start/stop sequence protects the generator's internal alternator from power surges.

Unplug all electronic devices from the generator before starting. Fuel Valve: Turn the fuel valve lever to the "ON" position. Check the fuel cap for the specific mixing

Slide the choke lever to the "CHOKE" or "CLOSED" position.