Thyssenkrupp Levant Stair Lift Installation Manual Full __full__ May 2026

The Levant uses a dry-rail system. Do not apply grease to the rail; instead, keep it clean and free of dust.

Slide the internal joint pins into the rail channels and tighten the joining bolts until the rail is a single, rigid piece.

Ensure a minimum staircase width of 28–30 inches. thyssenkrupp levant stair lift installation manual full

Place the rail on the steps, ensuring a gap of approximately 5 inches (12 cm) between the rail and the wall. Step B: Secure the Mounting Brackets Attach the feet: Slide the mounting brackets onto the rail.

Constant beeping usually indicates the lift is not parked on a charging point. The Levant uses a dry-rail system

on the stairs to check the length. If the rail is too long, it can be cut from the bottom end using a circular saw with a metal-cutting blade.

Screw the brackets into the stair treads. For wood stairs, use the provided wood screws; for concrete, use masonry anchors. Step C: Mounting the Drive Unit Ensure a minimum staircase width of 28–30 inches

Comprehensive Guide: ThyssenKrupp Levant Stair Lift Installation Manual

Secure the locking bolt and connect the communication cable (usually a multi-pin plug) that links the seat controls to the main chassis. Step E: Electrical and Charging